BEARING

UNI BEARINGS

BE-1

BE-2        BE-3        BE-4        BE-5
BE-6   BE-7   BE-8   BE-9
BE-10   BE-11   BE-12   BE-13

 

BALL AND ROLLER BEARING

 

BE-14

 

Deep groove ball bearings, miniature and extra small bearings, angular contact bearings, self-aligning ball bearings, cylindrical roller bearings, tapered roller bearings, spherical roller bearings, thrust bearings, special application bearings.

 

 

NEEDLE ROLLER BEARING

  BE-15

 

Needle roller bearings have a cylindrical needle-type roller with a comparatively small diameter, where the length is greater than the diameter. Needle roller bearings have small cross-sectional height, and compared with other types of bearings, feature high load capacity and rigidity compared to the space taken by the bearing. Another feature is the low inertial force, which is appropriate for oscillating motion. Using these bearings, it is possible to make mechanical equipment smaller and lighter in weight. Also, it is easy to replace a sliding bearing with a Needle roller bearing.

 

 

 

 

  LARGE BEARING

BE-16

 

Bearings with a diameter of 180mm or more are called large bearings. We have various models -- among which are bearings with an outer diameter exceeding 3 ~ 5 m, and single bearings with a load capacity of 14,000 tons.

 

 

 

   CAM FOLLOWER

  BE-17

 

 

The Cam Follower is a compact bearing with a high-rigidity shaft and a built-in needle bearing. Most suitable as a guide roller for cam mechanisms and linear motion of automated machines and dedicated machines.

 

 

 SELF LUBRICATION BEARING


Range mainly includes metal-polymer composite bearings, wrapped copper bearings, cast copper bearings, bimetal bearings. Either your application is for self-lubricating use or for oil/grease-lubricating use, we have the capability to provide you best solution.

BE-18

 

 

                     LINEAR BEARING, GUIDES AND SUPPORT              

BE-19

BE-20

 

 

  PLUMMER & PILLOW BLOCK BEARING

 BE-21

 

The pillow block type is the most popular unit and is used in many kinds of the transmission devices application supported driving shaft. Mounting is simple and reliable securing by means of set screws on the inner rings. Optional adapter sleeve design to secure shaft is also available. It is use as an intermediate bearing of the long shaft.

Plummer blocks are bearing blocks for self-aligning roller or ball bearings. This range is designed to handle higher load rating and moderate speed and allow dismantling of shaft without having to move the housing mounting as well.

 

 

 

   FAN & BLOWER PILLOW BLOCK BEARING

 BE-22

 BE-23

The Fan and Blower Pillow Block bearing houses two standard bearings eliminating the requirement for two Pillow block blocks and two mounting surfaces. Suitable for high speed application design and characteristics for the Air handling industries. In certain application where for bigger idler Pulley is required, this pillow block would be also be suitable. The bearing housing with the bearing can accommodate up to maximum shaft 70mm diameter with special locking collars that yield superior axial holding force. The Powder coating cast iron housing can handle the harsdest enviroments.

 

Contact Us

ADD:

19, PIONEER SECTOR 2
SINGAPORE 628379

 

 
  Email: unidrive@singnet.com.sg